Additel 780 Pressure Controller

Additel 780 Pressure Controller

  • Description
  • Features
  • Applications
  • Specifications
  • Order Info

Description

For years, Additel have provided the most durable, accurate, quality pressure calibration products for field applications. The Additel 780 controller incorporates the same durability, accuracy, and quality into a new bench top controller packed with features and functionality that is remarkably easy to use. The Additel 780 offers two base ranges: to 1,000 psi (70 bar) and to 3,000 psi (200 bar). The base range establishes the maximum controlling range of the controller. Each configuration includes a control sensor in which you can preselect the sensor range best suited your application. External and internal sensors can be used which allows for expanded range and accuracy capability in the future.

Modular Design
Each unit comes with one Intelligent Pressure Module configured to the many range offerings provided. Standard accuracy sensors (ADT160A-CPXXX) are silicon pressure sensors with a 1 year accuracy of 0.02% FS. The precision quartz based sensors improve the 1 year accuracy specification to 0.005% of reading + 0.005% FS. Each sensor has been specially aged, tested and screened before assembly. After assembly each sensor is temperature compensated over the range of -10°C to 50°C. The Additel 780 allows for one internal pressure sensor and one external pressure sensor. The modular design of this unit provides for interchangeability of both the internal and external sensors with other Intelligent Pressure Modules.In addition to the Intelligent Pressure Modules, the Additel 780 has a built in barometric sensor. This allows for switching between gauge pressures to absolute pressures.

Standalone Solution
Typical pressure controllers will require a nitrogen bottle for the gas supply which make it difficult to move the controller around without having to move or connect to another bottle. The Additel 780 is unique in that with the optional electric pump, you can generate pressures to 1,000 psi (70 bar) without the need of a gas bottle.

Process Functionality
The 780 Pressure Controller is considered to handle a very wide range of applications which may normally require a pressure calibrator. Built-in capability, includes current and voltage measurement capability, 24 volt loop power, HART® and Profibus PA communication, switch measurement capability, selectable analog output and much more.

• Pressure ranges from vacuum to 3,000 psi (200 bar)
• Precision model accuracy of 0.005%RD + 0.005%FS
• Standard model accuracy of 0.02%FS
• HART Communication and Profibus PA
• Control stability of 0.003%FS
• Easy-to-use icon based user interface

The 780 Pressure Controller is considered to handle a very wide range of applications which may normally require a pressure calibrator. Built-in capability, includes current and voltage measurement capability, 24 volt loop power, HART® and Profibus PA communication, switch measurement capability, selectable analog output and much more.

Specs

Measurement Specifications

Model NumberADT780-1KADT780-3K
Pressure range-14.5 to 1,000 psi (-0.95 to 70 bar)-14.5 to 3,000 psi (-0.95 to 200 bar)(1)
Control stability0.003% FS
Precision (includes 1 year stability)See pressure range table
1 Year stability0.01% FS standard accuracy sensors 0.005% FS precision accuracy sensors
Mediaclean Gas
Over-range indication103% to 120% (based on sensor)
Resolution4, 5, 6, or 7 digits (user selectable)(2)
Pressure typeGauge, Absolute
Warm up time15 minutes

Typical pressure settling time (within 0.003%FS)

20 seconds (10%FS pressure change assuming 50ml test volume)
Measurement unitsPa, hPa, kPa, MPa, bar, mbar, psi, mmHg@0°C,cmHg@0°C, mHg@0°C, inHg@0°C, inH2O@4°C, mmH2O@4°C, cmH2O@4°C, mH2O@4°C, mmH2O@20°C, cmH2O@20°C, mH2O@20°C, kg/m2, kg/cm2, mtorr, torr, atm, lb/ft2, tsi, user selectable
Minimum control pressure(3)0.0001 psi0.001 psi

(1). Gas booster or HP gas supply required to reach 3,000 psi (200 bar). Booster ordered separatel.
(2). Digit resolution for precision model only.
(3). Dependent on pressure module.

Barometric Measurement Specifications

Sensor/ModeGaugeAbsolute
ADT160A-02-CPXXN/A40Pa(1)
ADT160A-01-APXXQ3Pa(2)N/A

 

Barometer range (60~110)KPa, the accuracy is 40Pa (11Pa is optional)
(1). 40Pa uncertainty (k=2) includes calibration uncertainty, linearity and long term stability (< 30Pa per year). Barometer range of 60 to 120KPa.
(2). Combined linearity, hysteresis and repeatability. Add 3Pa when used in gauge mode. When using the ADT160A-01-APXXQ sensors with the ADT780 controller in gauge mode, regular zeroing will realign the barometric reading to provide the most accurate result.

 

Electrical Measure Specifications

SpecificationRangeResolutionAccuracy
Volts DC-30 to 30 V0.1 mV±0.01% rdg + 1.5 mV
-300 to 300 mV1 uV±0.01% rdg + 15 uV
Current DC-30 to 30 mA0.1 uA±0.01% rdg + 1.5 uA
Switch testIf the switch has detected voltage, the range is from 3 – 24 V
DC 24V output24V ± 0.24V, max 30 mA

Physical Specifications

SpecificationADT780-1K & ADT780-3K
Power100 – 240V, 50/60 Hz
Pressure portsG1/8 F
Storage temperature-20°C to 70°C
Operating environment0-95% RH non-condensing
Display7 inch (17.8 cm) color, touch screen display
Weight33 lbs (15 kg)
Dimensions(DWH)16.5 x 17.3 x 5.2 inch (419 x 440 x 132 mm)
MountingStandard desktop, optional rack mount
Shock4G
Vibration1G 10Hz~500Hz

Other Specifications

WiFi specifications802.11 b, g, and n
Stability indicatorUser selectable
Typical slew rateTypically 20 seconds
Operating modesControl, measure, and vent
Display modesController – show pressure indication and control
Calibrator – shows pressure indication, control, and electrical measurement
LocalizationEnglish, Chinese (simplified), German, Spanish, French, Italian, Portuguese, Russian, Japanese
ConformityCE
Calibration certificationNIST-traceable certificate of calibration with data included

 

Electric Pump and Booster

ADT780-1K-EPUMP Electric Pump

Generate Vacuum to 1,000 psi(700bar)
Built-in filter and liquid trap

Pressure range-13.5 to 1,080 psi (-0.95 to 75 bar)
Weight

69.6 lbs (31.6 kg)

Size(WHD)17.3 X 9.3 X 21.7 inch (440 X 235X 550 mm)
Power100 to 240V
MediaAir
Outlet portG 1/8F
Storage temperature-20°C to 70°C
Operating environment0-90% RH non-condensing
MountingStandard desktop, optional rack mount
Control operation2 LED displays with pressure limit settings
Typical max pressure timeApprox 2 min with ADT780 Controller

 

ADT780-3K-BST Booster
3,000 psi (200bar) Gas booster specification

Minimum inlet pressure300 psi (20 bar)
Out pressure range300 to 3,600 psi (250 bar)
Inlet flow rate500ml/min
Size (WHD)17.8 X 7.3 X 23.9 inch (451 X 185 X 607 mm)
Weight74 lbs (33.6 kg)
Power100 to 240V
Supply mediaNitrogen or clean gas

MODEL SELECTION GUIDE (controller without E-pump)

Model -
ADT780
ADT780S

Maxmum Range -
3K = 3,000 psi (200bar)
1K = 1,000 psi (70 bar)

Pressure Range
See ADT160A range table

Manifold type port -
N = 1/4NPT male
N2 = 1/2NPT male
B = 1/4BSP male
B2 = 1/2BSP male
M = M20x1.5 male

HABP - High Accuracy Barometer